120mm EcoTherm Inno-Torch Flat Roof Insulation Board (Pack of 4)

Part of the Building Innovation product range, 120mm EcoTherm Inno-Torch Flat Roof Insulation Board provide a slim yet robust 120mm insulation solution for flat roofs. These versatile boards are compatible with torch-on and roll-and-pour felt systems, mastic asphalt, and fully adhered single-ply systems, and can be used on concrete, timber, or metal decks. With thermal conductivities as low as 0.024 W/mK, 120mm Ecotherm Inno-Torch boards enable achieving target U-values with minimal construction thickness.

Product specification

• Thickness: 30mm - 130mm
• Board size: 1200mm x 600mm
• Pack Quantity: 4
• Coverage: 0.72m2 per board
• Pack Coverage: 2.88m2
• Thermal conductivity: 25-79mm: 0.027 W/mK, 80-119 mm: 0.025 W/mK, 120+ mm: 0.024 W/mK
• Compressive Strength: 10%
• WaterProofing: It is suitable for use with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems, on concrete, timber or metal decks.
• Reaction to fire: Euroclass rating of F
• Insulation Material: Inno-Torch is a high performance rigid thermoset polyisocyanurate (PIR) insulation.
• Application: For use on new roofs, refurbished or for upgrading the thermal performance of existing flat roof.
• Product suitability: Fitted with Torch-on-Felt and roll and pour felt systems, mastic asphalt and fully adhered single ply systems

Product Highlights

1. Compatible with torch-on, roll-and-pour felt systems, mastic asphalt, and fully adhered single-ply systems.
2. Suitable for both new and existing concrete, timber, and metal decks.
3. Lightweight PIR flat roof insulation boards designed for easy transportation, cutting, and installation.

Applications

• 120mm Inno-Torch flat roof boards are designed for use in various roofing applications, including new builds, roof refurbishments, and thermal performance upgrades for existing roofs.
• They are compatible with torch-on, roll-and-pour felt systems, mastic asphalt, and fully adhered single-ply systems, and can be installed on concrete, timber, or metal decks.

Water Vapour Resistance

120mm Ecotherm recommends a Condensation Risk Analysis (CRA) be completed for each project. The 120mm insulation boards should be installed over a Vapour Control Layer (VCL) or sealed metal deck. Consideration should also be given to BS 5250: 2021 (Management of moisture in buildings. Code of practice) and BS 6229: 2018 (Flat roofs with continuously supported flexible waterproof coverings. Code of practice).

Fire Performance

For guidance regarding the routes to compliance for meeting fire safety requirements please refer to the relevant Building Regulations/Standards for England, Wales and Scotland. Under System 4 AVCP, Inno-Torch has a Euroclass rating of F. Additional materials can be placed above the insulation layer within a roofing system including, but not limited to, waterproofing materials, reinforcement layers, primers and carrier membranes. These additional materials complete the roofing system. As such, the fire performance of a roofing system is predominantly determined by these finishes.

Info

Have a browse of our Ecotherm Products stock and filter by thickness or coverage on the left-hand side of the page. If you’d like to talk through the suitability of some products for your project, or get a quantity discount quotation please call us by phone on +4402039519012 , email sales@insulationstoreonline or Live Chat - Lowest UK Ecotherm Insulation Prices.